Entry Gear

Revised Edition Effects Board

owner: Say69

My last post was a mix of overdrive and natural tone, but I wanted more depth in the distortion instead of overdrive. I thought I would change it to distortion, and when I looked at the changes, I came up with some interesting ideas, so I reassembled the entire board internally! I've reworked the entire board internals.

Last time, the EQ and position in the final position also changed.
I now apply EQ only to the natural tones in the mix, using the AC-2 as a filter before the EQ to make the top and body slap the way I like them to sound, and the EQ to emphasize the attack of the low frequencies. I mix this created sound with the MetalMuff distortion sound using the line selector. I set the Metal Muff output level on the line selector at about 9:00 to 10:00, but not too much, or the slap will be just too rough.
Metal Muff is connected in series with Metal Muff from the overdrive, so the overdrive is not connected to the Metal Muff. The metal muff is connected in series with the overdrive, so you can use the overdrive in a variety of ways.