(Sold)Maker unknown / Les Paul type
owner: Shin
Purchased 4.2014:I was not satisfied with the condition of my Legend Les Paul Custom type and the fact that it was not a set neck, so I thought I would buy a set neck next time.
About two weeks later, I went to Hard Off and found this one. I bought it because it was junk, cheaper than Legend, and had a set neck.
The previous owner had removed the paint from the head, so I don't know where it is.
The sound is a little stuck in some parts and the plastic washer of the 4th string peg is cracked because I knocked it over at home...
On 9/7 of the same year, I bought replacement parts at ESP and later repaired the fret rubbing and pegs by myself.
2015.2.8: I tried to replace the PU on Duncan by myself, but failed...
I had the repair workshop look at it and found that it was a bad solder and the front tone pot was also broken, so I had them replace it together.
I was copying Hyster at the time, so I made a Reverse zebra SH-4 JB in the style of KEN YOKOYAMA and aged the front PU cover with a taper and put gummed tape on the selector.
April 19, 2015, I returned the rear PU and other parts to stock and removed the cover because the front PU sounded very muffled.
Now I think the neck and body were not mahogany...
sound features | |
---|---|
purchase price | 4320 yen |
fingerboard material | Rose wood |
number of frets | 22 |
scale length | medium |
controls | 2Vol,2Tone,3way toggle SW |
bridge | T.O.M |
category | Electric-Solid-Body-Guitar |