Entry Gear

RY Guitar/ORDER TL TYPE SSH FRT

owner: Shin

2022.4.5: I also ordered a neck based on a body that appeared on warmoth's stock list last fall, and it has finally been installed after arriving very late in terms of production and transportation.
The SRV shaped neck is slightly thicker than the 59 type, but the asymmetrical shape is thicker on the 6-string side and thinner on the 1-string side, so it has a unique feel and is thinner than the 59.
The electrical system is installed by myself.
There is a pickguard, but the single PU is direct-mounted for efficiency.
The height of the PU can be adjusted from the mounting screw holes with a thin screwdriver.
The top is painted in orange gloss finish, which is brighter and more yellow than the original Telecas I ordered.
It is brighter than the last Corinna Tele we made, but it is still hard to capture the real color with a smartphone camera.
The sides, back, and neck are natural satin finish.
The position marks are Moongrow (luminescent) including the sides.
2023.2.16: When I installed this guitar, I had set FRED and Texpex2 as Haruhata spec, but it didn't sound like that from the spec, so I changed all PU to DiMarzio and joint plate to 2mm made by FREEDOM.
2025.4: I replaced the PUs with DiMarzio DP181/DP188/DP151.
It looks like 3 humbuckers, but the front and center are wired in parallel for a noiseless single sound.
The rear is also series ↔ parallel wired with a switch on the tone pot to make it sound like a 3S.