Entry Gear

(Sold) JACKSON Soloist

owner: Shin

2015.12.8: I knew the goodness of the through neck in Horizon, but I didn't use it in the main because it was difficult to play due to poor condition and position mark. Also, I've always wanted this one because it is said to be a unique neck shape that is easy to play fast and longing for Jackson during the big logo period. As usual, the state is junk, this cracks when the selector is attached, and the tone is PU switching with 2way SW. There was no center PU, arm, or volume knob, and the screws on the panels were minimal. All the stickers were related to Nuno, and the rear PU was also L500. The thinness of the neck is as shocking as when I played Ibanez's RG for the first time. By the way, TEJ has a similar shape, but is it slightly thicker than this? It's hard to see the color in the image, but it's gunmetal black. Made in China Single size without ham PU center ➡ Jackson model number unknown 2way 6pin SW is ham PU coil tap SW wiring wiring is re-wired with Belden and kester44 Jack is made by Switch craft DUNLOP lock pin gold is attached, so for schaller lock pin There was a dent when the replacement seal was peeled off, and there was a scratch when the adhesive left when peeling off was removed with a cutter (´Д ｀) The second piece is in the state at the time of acquisition. The block was cracked, so I replaced it with a new one, and the arm bar is using the arm attached to the 2 ham soloist I bought later. 2016.9.28: The L-500 was so unique that I replaced it with the Dimarzio DP192, which was given to me by a Twitter follower. This gives the impression that the appearance and sound are calm. 2016.11: I got a custom of this high-end model and traded it with effector + α to the guitarist who gave me the Air Zone on it for the purpose of organizing the number. By the way, it was said that the Air Zone was not needed, so I handed it over because the rear PU was out of stock (laughs) I'm glad that you liked it very much.