(Sold)RY Guitar/HSH Dinky Type (Order Made)
2021.10.27: I was able to purchase this directly from the 1st owner.
It is in good condition except for the string gauge, screws, and insert blocks which have been changed from the specifications shown in the gallery.
The satin paint on the neck is starting to shine due to age from being played, but other than that, it is in good condition and shows no signs of use.
The bridge is designed to be mounted on a GOTOH FRT, and the Floyd original is interfering with the pickguard and body, so it will be replaced soon.
2021.11.8: I replaced the bridge with a GOTOH, but the first string side still interferes with the body.
I replaced the selector with a superswitch to switch to 2H mode normally and toggle to HSH mode with the tone switch pot.
The Vol knob was attached quite close to the selector, so I replaced the metal knob with a traditional knob and had a new pot hole drilled a little higher up to the extent that the original hole is hidden.
2021.11.9: I had the workshop check where the bridge was interfering with the body and pickguard, and they thought the anchor had collapsed, but the play between the anchor and stud seemed to have expanded a little and collapsed.
2022.4: I sold this one because the dinky type of Jim Burst can be made into HSH and I preferred that neck shape.
USA production → Japan incorporation
The difference in sound output between SSV and V60LP was hard to handle even though I thought it was inevitable, so I handled it with 2H layout wiring, but I still feel the compatibility is subtle with this bridge and specs.
Quilt Maple Top/Alder Back
BIRDS EYE MAPLE
BIRDS EYE MAPLE
|number of frets|
22(#6100 Stainless Steel)
Suhr F:SSV NECK/C:V60LP/SSV+ 53mm BRIDGE
1Vol,1Tone(Pull with Lever SW Mode Select),5way Lever SW
GOTOH 1996T/Floyd Rose Original R3