Entry Gear

FERNANDES/FR-ELT SUS

owner: Shin

2020.7.4: Probably the cheapest unit I could buy at the moment, but unfortunately the sustainer did not work.
Other than that, it is in pretty clean condition with no signs of use.
The difference from the sample unit I recently acquired is that the neck is not a scarf-jointed head, but a 3-piece hard maple neck that connects directly to the head, and is manufactured in Japan with stainless steel frets. The difference is that the neck is not a scarf-jointed head, but a 3-piece hard maple neck connected directly to the head, with stainless steel frets manufactured in Japan.
2020.9.8: While re-setting up the sustainer, I replaced the rear PU and the sustain Vol that was a switch pot with a mini-toggle SW with the sustain Vol fixed at full ten on the foundation side, and the effect was changed to a foundation bypass (rear PU and Vol) instead of coil tap. pot directly connected) instead of coil tap.
This way, even if the battery runs out during use, the sound will still come out and the selector will be bypassed, so you can switch from rear PU direct to front and mix sound like TOM Anne with the mini switch. I think the lever switch is reflexive.
I don't think I would use it that way because I think I would use the lever switch reflexively.
I am satisfied in many ways because I can now use it as a guitar with 1 rear hum and 1 vol in effect.